| Volkswagen Beetle 1.8 Turbo INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust (8 Req) *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61772 |
|
| Volkswagen Beetle 4 CYL INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic 8 Req *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Beetle 4 CYL Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic 8 Req *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Beetle TDI Diesel INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic 8 Req *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Beetle TDI Diesel Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic 8 Req *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Corrado 1.8L INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf GTI 16V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf GTI 8V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf III GL INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Golf III GL Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Golf III GL INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf III GTI VR6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf IV GLS 4 CYL INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Golf IV GLS 4 CYL Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Golf IV GTI VR6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Golf IV TDI Diesel INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Golf IV TDI Diesel Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Golf TD (Canada) INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Jetta Diesel INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Jetta GL INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Jetta III GL 4 CYL INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Jetta III GLX VR6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Jetta IV GLS 4 CYL INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Jetta IV GLS 4 CYL Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Jetta IV TDI Diesel INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic ALH Eng *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Volkswagen Jetta IV TDI Diesel Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic ALH Eng *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
OES-A4010-133887 |
|
| Volkswagen Passat 16V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Passat Turbo 20V INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust (8 Req) *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61772 |
|
| Volkswagen Passat Turbo 20V German Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust (8 Req) *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
GER-A4010-61772 |
|
| Volkswagen Passat Turbo 20V INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Intake (12 Req) *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61773 |
|
| Volkswagen Passat V6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Rabbit Febi Cam Follower
Solid
FEB-A4010-13756 |
|
| Volkswagen Rabbit Cabriolet INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Rabbit GTI Febi Cam Follower
Solid
FEB-A4010-13756 |
|
| Volkswagen Scirocco 16V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Volkswagen Type 1 Brazil Cam Follower
BRA-A4010-14939 |
|
| Volkswagen Type 2 Brazil Cam Follower
BRA-A4010-14939 |
