|
|
|
OEM Replacement Parts > Water Pump > Toyota Water Pump
Toyota Water Pump Catalog
|
Looking for an Toyota Water Pump?
Use our extensive parts catalog above to find your parts quickly and easily.
We carry AISIN, ASCO/Aisin, Bosch, GMB, Japan, NPW Toyota replacement Water Pump for
4Runner 4Cyl 2WD SR5, 4Runner 4Cyl 4WD, 4Runner 4Cyl 4WD EFI, 4Runner 4Cyl 4WD SR5, 4Runner V6 2WD, 4Runner V6 4WD, 4Runner V6 4WD SR5, 4Runner V8 2WD, Avalon XL/XLS, Camry I4 Hybrid, Camry I4 Sedan, Camry I4 Wagon, Camry V6 Sedan, Camry V6 USA Sedan, Celica GT, Celica GT Liftback, Celica GTS Cpe/LBack, Celica GTS Liftback, Celica ST Coupe, Celica ST Cpe/L-Back, CelicaGT Convertible, Corolla 2Dr Coupe, Corolla 2WD Wagon, Corolla 4Dr, Corolla, Corolla 4Dr Sedan, Corolla 4Dr Sedn 1.6, Corolla 4Dr Sedn 1.8, Corolla 4Dr Wagon, Corolla FWD Sedan, Corolla GTS Coupe, Corolla, Corolla RWD Coupe, Corolla RWD GTS Coup, Corolla Sports Coupe, Corolla Wagon, Corona, Cressida Sedan, Highlander 2WD V6, Highlander 4WD V6, LandCruiser 2Dr Jeep, LandCruiser 4 Dr, Land Cruiser, MR2, MR2 Turbo, Pickup 4WD Std Bed, Pickup I4 4WD RegCab, Pickup I4 4WD X-Cab, Pickup Std/Long Bed, Pickup V6 2WD X-Cab, Pickup V6 4WD X-Cab, Previa 2WD, Previa Sup Charge2WD, Prius, PUP 2WD Crb Reg&XCab, PUP 2WD Reg-Cab Carb, PUP 2WD Reg-Cab EFI, PUP 2WD Std/Long Bed, PUP 2WD Xtra-Cab EFI, Pickup Truck, PUP 4WD EFI Reg&XCab, RAV4 2WD/2-Door, RAV4 2WD/4-Door, RAV4 2WDBase/L/Sport, Sequoia V8 2WD/4Door, Sequoia V8 4WD/4Door, Sienna, Sienna 2WD CE/LE/XLE, Solara V6 Hardtop, Supra Celica, Supra Non-Turbo, Supra Turbo, T100 2WD V6 Reg Cab, T100 2WDV6 Xtra-Cab, T100 4WD V6 RCab1/2T, T100 4WDV6 RCab/XCab, Tacoma Prerunner, Tacoma 2WD I4 RegCab, Tacoma 2WD I4 XtrCab, Tacoma 2WD V6 XtrCab, Tacoma 4WD V6 4 Dr, Tacoma 4WD V6 XtrCab, Tercel 2/4Dr EFI, TercelSTD/DX 2/3/5Dr, Tundra 2WD V6 4 Dr, Tundra 2WD V8 4 Dr, Tundra 4WD V8 4 Dr, Tundra 4WD V8 RegCab.
Various product notes and some applications that you can find above in our catalog:
- This pump must be checked for impeller to housing clearance prior to instalation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. But if you use 16100-19305 (w/ housing) then you can use this for either 16110-19175 or -19185.. - This pump will replace the original pump # 16100-79135 on Celica models GT & GTS - 09/89 to 07/91 with 5SFE engine - however you must also use # 90916-03046 (46mm o.d.) thermostat & # 16321-03060 thermostat housing - * OE water pump part # 16100-79135-83 has a larger (54mm o.d.) thermostat & thermostat housing than water pump # 16100-79185-83 (46mm OD). ASC brand include: 3 o-rings and a small gasket. No water pump gasket.. ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #.. ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #. NPW brand will include all critical gaskets above FROM July 2006.. ASC brand includes: 16325-46010 (1 pc.) water inlet housing gasket and 96761-24040 (1 pc.) water pump o-ring. In addition you may require 2 addi- tional o-rings not included w/ this water pump. 96761-24022 (2 pcs.) water by-pass pipe o-ring and 96761-24028 (1 pc.) water outlet by-pass o-ring.. ASC brand includes: water pump gasket, medium o-ring, & small gasket. NPW brand includes: same as above w/ the addition of a small o-ring. This is the pump ONLY. If you need the housing also, please order part # 16100-79185-83.. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.. ASCO brand does not come with the gasket. The part number for the gasket is 16124-16020. Caution: OES is WITH housing. ASC is WITHOUT housing.. Does not require pump housing to block gasket - use silicone sealant Beware, ASC brand is with housing AND pulley. NPW brand is WITHOUT housing.. GMB is WITH pulley. The water pump bearing is a ball bearing, which differs from the more heavy duty water pump, GWT-133A, which uses a combination ball/roller water pump bearing. GWT-133A is not available yet.. If the housing is required, you must purchase 16100-79095 which we do not stock.. Make sure this contains 3 o-rings. 2 large ones (96711-24035) are 40mm OD, and used on the water pump and the water outlet. The small o-ring (96711-24 013) is 18mm OD, and used on the water by-pass pipe.. OES sells the pulley separately. 16173-88600 is the pulley part #, which we do not carry.. Pump # 16100-79135-83 on Celica model GT & GTS - 09/89 to 07/91 with 5SFE engine can be replaced by part # 16100-79185-83 if you use part # 90916-03046 (46mm o.d.) thermostat and # 16321-03060 thermostat housing * OE water pump part # 16100-79135-83 has a larger (54mm o.d.) thermostat & thermostat housing than water pump # 16100-79185-83 Requires: 1 gasket=heater return,16258-15011 or -74021.. Pump must be inspected for impeller-to-housing clearance prior to installation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. Pump w/ Housing (16100-19305) replaces both Aisan & Aisin type pumps.. Reqs 16325-62010 thermostat o-ring and 15692-76010 oil filter housing o-ring. The ASC water pump is the latest Toyota version. On applications with the 3VZFE engine 6/91-8/92, you also need to replace the engine mount bracket. Apparently, there is a clearance problem on these models and the updated bracket is needed to solve it. Bracket part # 12315-62031. There is no seprate OE # for the gasket. Ok to use sealant.. This can be used to replace either 16110-19175 or 16110-19185.. w/ gasket - Aisin and NPW mfg water pumps should be checked for impeller clearance prior to installation because not all back housings are the same and the impeller may interfere with the back housing -. W/ paper gasket, not an o-ring. If you want the o-ring type, then please order 98187 or WPT-106.. w/ rubber o-ring; w/o housing. Important note regarding mounting bolts: For applications produced up to January 31, 2002, the original bolts can be used to mount this water pump. For applications produced from February 1, 2002, you must use a shorter bolt, part # 91511-G0622, which we do not stock.. W/o housing - pump only ASC/Aisin brand comes with press on ''multi-rib'' pulley GMB brand comes with a 4 bolt hub for ''original type'' bolt on pulley ASC brand and GMB brand is w/ gasket ONLY, no orings.. We do not carry 16100-79126 which is WITH housing.. WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.. WITHOUT PIPE at thermostat housing; fits models WITHOUT oil cooler Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler..
All Japan made models None were produced in US during this period.. All USA and Japan made models ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.. ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #.. ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #. NPW brand will include all critical gaskets above FROM July 2006.. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.. Japan & USA made model w/ MT only ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.. Japan built models only 1/2 ton w/ tow package DLX & SR5 models only. Japan made models w/ AT None were produced in US during this period.. Japan made models w/ MT None were produced in US during this period.. OES sells the pulley separately. 16173-88600 is the pulley part #, which we do not carry.. Reqs 16325-62010 thermostat o-ring and 15692-76010 oil filter housing o-ring. Technically, this is the "WITH HOUSING" OE #. However our NPW brand is the pump ONLY. We do not offer the water pump WITH housing at this time.. There is no seprate OE # for the gasket. Ok to use sealant.. W/ Housing. W/ Housing - This pump will replace the original pump # 16100-79135 on Celica models GT & GTS - 09/89 to 07/91 with 5SFE engine - however you must also use # 90916-03046 (46mm o.d.) thermostat & # 16321-03060 thermostat housing - * OE water pump part # 16100-79135-83 has a larger (54mm o.d.) thermostat & thermostat housing than water pump # 16100-79185-83 (46mm OD). ASC brand include: 3 o-rings and a small gasket. No water pump gasket.. W/ Housing - This pump will replace the original pump # 16100-79135 on Celica models GT & GTS - 09/89 to 07/91 with 5SFE engine - however you must also use # 90916-03046 (46mm o.d.) thermostat & # 16321-03060 thermostat housing - * OE water pump part # 16100-79135-83 has a larger (54mm o.d.) thermostat & thermostat housing than water pump # 16100-79185-83 (46mm OD). ASC brand include: 3 o-rings and a small gasket. No water pump gasket. This pump will replace the original pump # 16100-79135-83 on Celica models GT & GTS - 09/89 to 07/91 with 5SFE engine - however you must also use part # 90916-03046 (46mm o.d.) thermostat & # 16321-03060 thermostat housing.. W/ Housing ASC brand includes: 16325-46010 (1 pc.) water inlet housing gasket and 96761-24040 (1 pc.) water pump o-ring. In addition you may require 2 addi- tional o-rings not included w/ this water pump. 96761-24022 (2 pcs.) water by-pass pipe o-ring and 96761-24028 (1 pc.) water outlet by-pass o-ring.. w/ housing Caution: OES is WITH housing. ASC is WITHOUT housing.. W/ Housing Make sure this contains 3 o-rings. 2 large ones (96711-24035) are 40mm OD, and used on the water pump and the water outlet. The small o-ring (96711-24 013) is 18mm OD, and used on the water by-pass pipe.. W/ Housing Pump # 16100-79135-83 on Celica model GT & GTS - 09/89 to 07/91 with 5SFE engine can be replaced by part # 16100-79185-83 if you use part # 90916-03046 (46mm o.d.) thermostat and # 16321-03060 thermostat housing * OE water pump part # 16100-79135-83 has a larger (54mm o.d.) thermostat & thermostat housing than water pump # 16100-79185-83 Requires: 1 gasket=heater return,16258-15011 or -74021.. W/ Housing The ASC water pump is the latest Toyota version. On applications with the 3VZFE engine 6/91-8/92, you also need to replace the engine mount bracket. Apparently, there is a clearance problem on these models and the updated bracket is needed to solve it. Bracket part # 12315-62031. W/ Housing This can be used to replace either 16110-19175 or 16110-19185.. W/ Housing NPW brand is w/o housing Does not require pump housing to block gasket - use silicone sealant Beware, ASC brand is with housing AND pulley. NPW brand is WITHOUT housing.. W/o Housing. W/o Housing ASC brand includes: water pump gasket, medium o-ring, & small gasket. NPW brand includes: same as above w/ the addition of a small o-ring. This is the pump ONLY. If you need the housing also, please order part # 16100-79185-83.. w/o housing ASCO brand does not come with the gasket. The part number for the gasket is 16124-16020. W/o Housing If the housing is required, you must purchase 16100-79095 which we do not stock.. W/o Housing Pump must be inspected for impeller-to-housing clearance prior to installation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. Pump w/ Housing (16100-19305) replaces both Aisan & Aisin type pumps.. W/o Housing w/ gasket - Aisin and NPW mfg water pumps should be checked for impeller clearance prior to installation because not all back housings are the same and the impeller may interfere with the back housing -. W/o Housing W/o housing - pump only ASC/Aisin brand comes with press on 'multi-rib' pulley GMB brand comes with a 4 bolt hub for 'original type' bolt on pulley ASC brand and GMB brand is w/ gasket ONLY, no orings.. W/o Housing We do not carry 16100-79126 which is WITH housing.. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.. W/o Housing Aisan made Pump must be inspected for impeller-to-housing clearance prior to installation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. Pump w/ Housing (16100-19305) replaces both Aisan & Aisin type pumps.. W/o Housing Aisin/ASCO made - This pump must be checked for impeller to housing clearance prior to instalation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. But if you use 16100-19305 (w/ housing) then you can use this for either 16110-19175 or -19185.. W/o Housing Aisin/ASCO made Pump must be inspected for impeller-to-housing clearance prior to installation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. Pump w/ Housing (16100-19305) replaces both Aisan & Aisin type pumps.. W/o Housing Aisin/ASCO type - This pump must be checked for impeller to housing clearance prior to instalation - There is a difference between the Aisan made vs. Aisin made. 16110-19175 = Aisan type 16110-19185 = Aisin type. These are NOT interchangeable. But if you use 16100-19305 (w/ housing) then you can use this for either 16110-19175 or -19185.. WITHOUT PIPE at thermostat housing; fits models WITHOUT oil cooler Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler..
| Toyota 4Runner 4Cyl 2WD SR5 NPW Water Pump
NPW-G3000-173585 |
|
| Toyota 4Runner 4Cyl 2WD SR5 ASCO/Aisin Water Pump
ASC-G3000-173585 |
|
| Toyota 4Runner 4Cyl 4WD NPW Water Pump
NPW-G3000-173585 |
|
| Toyota 4Runner 4Cyl 4WD AISIN Water Pump
ASC-G3000-173585 |
|
| Toyota 4Runner 4Cyl 4WD EFI ASCO/Aisin Water Pump
ASC-G3000-17540 |
|
| Toyota 4Runner 4Cyl 4WD EFI Bosch Water Pump
BOS-G3000-294534 |
|
| Toyota 4Runner 4Cyl 4WD EFI NPW Water Pump
NPW-G3000-17540 |
|
| Toyota 4Runner 4Cyl 4WD EFI GMB Water Pump
GMB-G3000-17540 |
|
| Toyota 4Runner 4Cyl 4WD SR5 ASCO/Aisin Water Pump
ASC-G3000-17540 |
|
| Toyota 4Runner 4Cyl 4WD SR5 Bosch Water Pump
BOS-G3000-294534 |
|
| Toyota 4Runner 4Cyl 4WD SR5 NPW Water Pump
NPW-G3000-17540 |
|
| Toyota 4Runner 4Cyl 4WD SR5 GMB Water Pump
GMB-G3000-17540 |
|
| Toyota 4Runner V6 2WD NPW Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
NPW-G3000-267303 |
|
| Toyota 4Runner V6 2WD ASCO/Aisin Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
ASC-G3000-267303 |
|
| Toyota 4Runner V6 2WD Bosch Water Pump
w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
BOS-G3000-294734 |
|
| Toyota 4Runner V6 2WD AISIN Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
ASC-G3000-267303 |
|
| Toyota 4Runner V6 4WD NPW Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
NPW-G3000-267303 |
|
| Toyota 4Runner V6 4WD ASCO/Aisin Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
ASC-G3000-267303 |
|
| Toyota 4Runner V6 4WD Bosch Water Pump
w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
BOS-G3000-294734 |
|
| Toyota 4Runner V6 4WD AISIN Water Pump
WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket. w/o housing WITH PIPE at thermostat housing; fits models WITH oil cooler. Do NOT assume that all AT applications have an oil cooler. and MT applications do not have an oil cooler. Some MT applications also have an oil cooler. ASC is no longer producing this pump w/ the "groove" on the sealing surface . These now include a metal gasket. NPW ones do have the "groove" on the sealing surface, and DO NOT include a gasket.
ASC-G3000-267303 |
|
| Toyota 4Runner V6 4WD SR5 GMB Water Pump
ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.
GMB-G3000-35539 |
|
| Toyota 4Runner V6 4WD SR5 NPW Water Pump
ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.
NPW-G3000-35539 |
|
| Toyota 4Runner V6 4WD SR5 ASCO/Aisin Water Pump
ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.
ASC-G3000-35539 |
|
| Toyota 4Runner V6 4WD SR5 ASCO/Aisin Water Pump
ASC-G3000-27974 |
|
| Toyota 4Runner V6 4WD SR5 GMB Water Pump
GMB-G3000-27974 |
|
| Toyota 4Runner V6 4WD SR5 AISIN Water Pump
ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine. ASC brand pump includes all necessary gaskets and o-rings. Pre-April 2004 pumps include a sealant "groove." Post-April 2004 ASC removed this groove. You can use a sealant OR the gasket, either will work just fine. GMB brand pump is w/ water pump gasket AND rubber o-ring. There is NO "groove." You can use a sealant or the gasket provided, either will work just fine. NPW brand is w/ water pump gasket AND rubber o-ring. There IS a "groove." You can use a sealant or the gasket provided and it works fine.
ASC-G3000-35539 |
|
| Toyota 4Runner V6 4WD SR5 AISIN Water Pump
ASC-G3000-27974 |
|
| Toyota 4Runner V8 2WD ASCO/Aisin Water Pump
ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #. NPW brand will include all critical gaskets above FROM July 2006. ASC brand includes water pump gasket (16571-50010) ONLY. NPW brand includes water pump gasket (16571-50010); water inlet housing o-ring (96761-35035); and water by-pass pipe o-ring (96761-24019), which is required by many applications listed for this part #. NPW brand will include all critical gaskets above FROM July 2006.
ASC-G3000-167168 |
|
| Toyota Avalon XL/XLS ASCO/Aisin Water Pump
W/o Housing
ASC-G3000-54487 |
|
| Toyota Avalon XL/XLS Water Pump
W/o Housing
OES-G3000-54487 |
Back to all OEM Replacement Parts.
|
|
|
|
|
