| Subaru 2WD models 1.1 - 1.6 Bosch Starter
BOS-F5000-11322 |
|
| Subaru 4WD models exc. Brat Bosch Starter
Remanufactured
BOS-F5000-11322 |
|
| Subaru 4WD models exc. Brat Denso Starter
Remanufactured
ND-F5000-137499 |
|
| Subaru Baja 2.5 Turbo P/up Bosch Starter
for models w/ M/T
BOS-F5000-27300 |
|
| Subaru Forester 2.5 4WD Starter
WSO-F5000-105066 |
|
| Subaru Forester 2.5 4WD Denso Starter
see NOTE!! This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru Forester 2.5 4WD Bosch Starter
see NOTE!! This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru Forester 2.5 4WD Denso Starter
ND-F5000-165663 |
|
| Subaru Forester 2.5 4WD Bosch Starter
BOS-F5000-54692 |
|
| Subaru Forester 2.5 4WD Starter
This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering. see NOTE!! This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
MEA-F5000-179533 |
|
| Subaru Hatchback OHV 4WD Bosch Starter
Remanufactured
BOS-F5000-11322 |
|
| Subaru Hatchback OHV 4WD Denso Starter
Remanufactured
ND-F5000-137499 |
|
| Subaru Impreza Outback Sport Bosch Starter
BOS-F5000-54692 |
|
| Subaru Impreza Outback Sport Starter
WSO-F5000-105066 |
|
| Subaru Impreza Outback Sport Denso Starter
ND-F5000-165663 |
|
| Subaru Impreza Outback Sport Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru Impreza Outback Sport Starter
This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering. see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
MEA-F5000-179533 |
|
| Subaru Impreza Outback Sport Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru Impreza 1.8 2WD Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru Impreza 1.8 2WD Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru Impreza 1.8 2WD Denso Starter
ND-F5000-165663 |
|
| Subaru Impreza 1.8 2WD Bosch Starter
BOS-F5000-54692 |
|
| Subaru Impreza 1.8 4WD Bosch Starter
BOS-F5000-54692 |
|
| Subaru Impreza 1.8 4WD Denso Starter
ND-F5000-165663 |
|
| Subaru WRX Impreza Turbo Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru WRX Impreza Turbo Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru WRX Impreza Turbo Starter
This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering. see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
MEA-F5000-179533 |
|
| Subaru Impreza 2.2 4WD Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru Impreza 2.2 4WD Starter
WSO-F5000-105066 |
|
| Subaru Impreza 2.2 4WD Bosch Starter
BOS-F5000-54692 |
|
| Subaru Impreza 2.2 4WD Denso Starter
ND-F5000-165663 |
|
| Subaru Impreza 2.2 4WD Starter
This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering. see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
MEA-F5000-179533 |
|
| Subaru Impreza 2.5 4WD Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru Impreza 2.5 4WD Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru Impreza 2.5 RS 4WD Bosch Starter
BOS-F5000-54692 |
|
| Subaru Impreza 2.5 RS 4WD Denso Starter
ND-F5000-165663 |
|
| Subaru Impreza 2.5 RS 4WD Starter
WSO-F5000-105066 |
|
| Subaru Legacy 2.2 2WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.2 2WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.2 2WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.2 4WD Bosch Starter
for models w/ M/T
BOS-F5000-27300 |
|
| Subaru Legacy 2.2 4WD Denso Starter
for models w/ M/T
ND-F5000-137503 |
|
| Subaru Legacy 2.2 4WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.2 4WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.2 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.2 SOHC 2WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.2 SOHC 2WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.2 SOHC 2WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.2 SOHC 4WD Denso Starter
for models w/ M/T
ND-F5000-137503 |
|
| Subaru Legacy 2.2 SOHC 4WD Bosch Starter
for models w/ M/T
BOS-F5000-27300 |
|
| Subaru Legacy 2.2 SOHC 4WD Denso Starter
for models w/ M/T
ND-F5000-137505 |
|
| Subaru Legacy 2.2 SOHC 4WD Denso Starter
for models w/ A/T This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.2 SOHC 4WD Bosch Starter
for models w/ A/T This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.2 SOHC 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.2 Turbo 4WD Bosch Starter
for models w/ M/T
BOS-F5000-27300 |
|
| Subaru Legacy 2.2 Turbo 4WD Denso Starter
for models w/ M/T
ND-F5000-137503 |
|
| Subaru Legacy 2.2 Turbo 4WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.2 Turbo 4WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.2 Turbo 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.5 4WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.5 4WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.5 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.5 DOHC 4WD Denso Starter
(see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.5 DOHC 4WD Bosch Starter
(see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.5 DOHC 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Legacy 2.5 DOHC 4WD Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Legacy 2.5 DOHC 4WD Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Legacy 2.5 DOHC 4WD Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Leone/Loyale OHC 2WD Bosch Starter
Remanufactured
BOS-F5000-11322 |
|
| Subaru Leone/Loyale OHC 2WD Denso Starter
Remanufactured
ND-F5000-137499 |
|
| Subaru Leone/Loyale OHC 4WD Bosch Starter
Remanufactured
BOS-F5000-11322 |
|
| Subaru Leone/Loyale OHC 4WD Denso Starter
Remanufactured
ND-F5000-137499 |
|
| Subaru Outback 3.0 6-Cyl. Denso Starter
(see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Outback 3.0 6-Cyl. Bosch Starter
(see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru Outback 3.0 6-Cyl. Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Outback 4WD 2.5 DOHC Bosch Starter
for models w/ M/T
BOS-F5000-27300 |
|
| Subaru Outback 4WD 2.5 DOHC Denso Starter
for models w/ M/T
ND-F5000-137505 |
|
| Subaru Outback 4WD 2.5 DOHC Denso Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
ND-F5000-137504 |
|
| Subaru Outback 4WD 2.5 DOHC Bosch Starter
This Bosch starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application as long as the following is observed: this unit has unthreaded bolt holes, spaced 120mm (4 3/4") apart. Either brand will fit as long as the mounting bolt hole dimensions are observed. Vehicles needing a starter with threaded bolt holes spacded 105mm (4 1/8") apart should use starter #SR 4307 X instead. for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11321 |
|
| Subaru Outback 4WD 2.5 DOHC Bosch Starter
for models w/ A/T (see NOTE) This starter can be either Mitsubishi or Nipponsenso brand. The two brands may differ in appearance, but either brand starter will work on this application.
BOS-F5000-11322 |
|
| Subaru XT 1.8 2WD Bosch Starter
BOS-F5000-11322 |
|
| Subaru XT 1.8 2WD Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
|
| Subaru XT 1.8 2WD Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru XT 1.8 4WD Bosch Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
BOS-F5000-87124 |
|
| Subaru XT 1.8 4WD Denso Starter
see NOTE!! for models w/ A/T This application may be equipped with either a Mitsubishi or Nippondenso brand starter. The two starters may differ in appearance, but either brand starter will work provided the following info is taken into account: most applications will use Bosch starter SR 176 X. This unit has NON-threaded mounting holes spaced 120mm (4 3/4") apart. A few applications may instead use Bosch starter SR 4307 X. This unit has THREADED mounting holes spaced 105mm (4 1/8") apart. If unsure, measure old starter before ordering.
ND-F5000-165677 |
