|
|
|
OEM Replacement Parts > Cam Follower > Subaru Cam Follower
Subaru Cam Follower Catalog
|
| Subaru Impreza 1.8 2WD Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. 16 per engine
-A4010-50050 |
|
| Subaru Impreza 2.2 4WD Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. 16 per engine
-A4010-50050 |
|
| Subaru Legacy 2.2 2WD Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. 16 per engine
-A4010-50050 |
|
| Subaru Leone/Loyale OHC 4WD Cam Follower
8 per engine
OES-A4010-53093 |
Back to all OEM Replacement Parts.
|
|
|
|
|
