| Subaru 2WD models 1.6 & 1.8 EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru 2WD models 1.6 & 1.8 ACEI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106329 |
|
| Subaru 4WD models exc. Brat FEQ Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-323937 |
|
| Subaru 4WD models exc. Brat EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-323937 |
|
| Subaru 4WD models exc. Brat EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru 4WD Turbo exc. Brat EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru Brat 1.8 Pickup FEQ Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-323937 |
|
| Subaru Brat 1.8 Pickup EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru Brat 1.8 Pickup EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-323937 |
|
| Subaru Brat 1.8 Pickup ACEI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106329 |
|
| Subaru Forester 2.5 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Forester 2.5 4WD FEQ Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Forester 2.5 4WD Axle Assembly
Front
OES-K4000-333292 |
|
| Subaru Forester 2.5 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Forester 2.5 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Forester 2.5 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Forester 2.5 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Hatchback OHV 2WD EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru Hatchback OHV 2WD ACEI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106329 |
|
| Subaru Hatchback OHV 4WD EMPI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-21634 |
|
| Subaru Hatchback OHV 4WD ACEI Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY!!!! Front see NOTE!!! Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106329 |
|
| Subaru Impreza Outback Sport First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza Outback Sport EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Impreza Outback Sport EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Impreza Outback Sport FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Imp O/B Sport 2.54WD FEQ Axle Assembly
Front for wagon models w/ A/T
FEQ-K4000-163227 |
|
| Subaru Impreza 1.8 2WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 1.8 2WD ACEI Axle Assembly
Front for models w/ M/T
ACE-K4000-106352 |
|
| Subaru Impreza 1.8 2WD First Equipment Quality Axle Assembly
Front for models w/ A/T
FEQ-K4000-241411 |
|
| Subaru Impreza 1.8 2WD EMPI Axle Assembly
Front for models w/ A/T
EMP-K4000-235124 |
|
| Subaru Impreza 1.8 2WD EMPI Axle Assembly
Front for models w/ M/T
EMP-K4000-57125 |
|
| Subaru Impreza 1.8 2WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Impreza 1.8 2WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 1.8 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Impreza 1.8 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 1.8 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Impreza 1.8 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru WRX Impreza Turbo EMPI Axle Assembly
Front for wagon models w/ A/T
EMP-K4000-269828 |
|
| Subaru WRX Impreza Turbo EMPI Axle Assembly
Front for wagon models w/ A/T
EMP-K4000-163227 |
|
| Subaru WRX Impreza Turbo EMPI Axle Assembly
Front for wagon models w/ M/T
EMP-K4000-269828 |
|
| Subaru WRX Impreza Turbo EMPI Axle Assembly
Front for sedan models w/ M/T
EMP-K4000-282574 |
|
| Subaru WRX Impreza Turbo EMPI Axle Assembly
Front for sedan models w/ A/T
EMP-K4000-282574 |
|
| Subaru Impreza 2.2 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Impreza 2.2 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 2.2 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Impreza 2.2 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 2.5 4WD EMPI Axle Assembly
Front for sedan models w/ M/T
EMP-K4000-282574 |
|
| Subaru Impreza 2.5 4WD EMPI Axle Assembly
Front for wagon models w/ A/T
EMP-K4000-269828 |
|
| Subaru Impreza 2.5 RS 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 2.5 RS 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Impreza 2.5 RS 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Impreza 2.5 RS 4WD ACEI Axle Assembly
Front
ACE-K4000-106332 |
|
| Subaru Impreza 2.5 RS 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Impreza 2.5 RS 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Impreza 2.5 RS 4WD FEQ Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru WRX STi 2.5L Turbo EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru WRX STi 2.5L Turbo First Equipment Quality Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru WRX STi 2.5L Turbo FEQ Axle Assembly
Front
FEQ-K4000-269735 |
|
| Subaru WRX STi 2.5L Turbo FEQ Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Justy 1.2 4WD FEQ Axle Assembly
w''27 Spline Outer Joint Front Left & Right w'27 Spline Outer Joint
FEQ-K4000-235380 |
|
| Subaru Legacy 2.2 2WD FEQ Axle Assembly
Front for models w/ M/T
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 2WD EMPI Axle Assembly
Front for models w/ A/T
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 2WD First Equipment Quality Axle Assembly
Front for models w/ A/T
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 2WD First Equipment Quality Axle Assembly
Front for models w/ M/T
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 2WD EMPI Axle Assembly
Front for models w/ M/T
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 2WD FEQ Axle Assembly
Front for models w/ A/T
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 SOHC 2WD First Equipment Quality Axle Assembly
Front for models w/ A/T
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 SOHC 2WD EMPI Axle Assembly
Front for models w/ A/T
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 SOHC 2WD EMPI Axle Assembly
Front for models w/ M/T
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 SOHC 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 SOHC 4WD EMPI Axle Assembly
Front A/T
EMP-K4000-269828 |
|
| Subaru Legacy 2.2 SOHC 4WD First Equipment Quality Axle Assembly
Front A/T
FEQ-K4000-163227 |
|
| Subaru Legacy 2.2 SOHC 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Legacy 2.2 SOHC 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 SOHC 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Legacy 2.2 Turbo 4WD EMPI Axle Assembly
Front Left and Right
EMP-K4000-269828 |
|
| Subaru Legacy 2.2 Turbo 4WD First Equipment Quality Axle Assembly
Front Left and Right
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 Turbo 4WD FEQ Axle Assembly
Front Left and Right
FEQ-K4000-241411 |
|
| Subaru Legacy 2.2 Turbo 4WD EMPI Axle Assembly
Front Left and Right
EMP-K4000-235124 |
|
| Subaru Legacy 2.5 4WD EMPI Axle Assembly
Front Left and Right
EMP-K4000-269828 |
|
| Subaru Legacy 2.5 4WD First Equipment Quality Axle Assembly
Front Left and Right
FEQ-K4000-163227 |
|
| Subaru Legacy 2.5 4WD EMPI Axle Assembly
Front Left and Right
EMP-K4000-163227 |
|
| Subaru Legacy 2.5 4WD FEQ Axle Assembly
Front Left and Right
FEQ-K4000-163227 |
|
| Subaru Legacy 2.5 DOHC 4WD EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Legacy 2.5 DOHC 4WD FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Legacy 2.5 DOHC 4WD Axle Assembly
Rear - Left
OES-K4000-57157 |
|
| Subaru Legacy 2.5 DOHC 4WD EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Legacy 2.5 DOHC 4WD First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Leone/Loyale OHC 2WD First Equipment Quality Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ M/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru Leone/Loyale OHC 2WD EMPI Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ M/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-46025 |
|
| Subaru Leone/Loyale OHC 2WD First Equipment Quality Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ A/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru Leone/Loyale OHC 2WD ACEI Axle Assembly
23 spline Inboard Joint Front for models w/ A/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106338 |
|
| Subaru Leone/Loyale OHC 2WD EMPI Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ A/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-46025 |
|
| Subaru Leone/Loyale OHC 2WD FEQ Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ M/T (see NOTE!!!) Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru Leone/Loyale OHC 4WD ACEI Axle Assembly
23 spline Inboard Joint Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
ACE-K4000-106338 |
|
| Subaru Leone/Loyale OHC 4WD FEQ Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru Leone/Loyale OHC 4WD First Equipment Quality Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru Leone/Loyale OHC 4WD EMPI Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-46025 |
|
| Subaru Outback 3.0 6-Cyl. EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Outback 3.0 6-Cyl. First Equipment Quality Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Outback 3.0 6-Cyl. FEQ Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Outback 4WD 2.2 SOHC EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Outback 4WD 2.2 SOHC First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Outback 4WD 2.5 4Cyl FEQ Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Outback 4WD 2.5 4Cyl EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Outback 4WD 2.5 4Cyl First Equipment Quality Axle Assembly
Front
FEQ-K4000-163227 |
|
| Subaru Outback 4WD 2.5 4Cyl EMPI Axle Assembly
Front
EMP-K4000-163227 |
|
| Subaru Outback 4WD 2.5 DOHC FEQ Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru Outback 4WD 2.5 DOHC EMPI Axle Assembly
Front
EMP-K4000-235124 |
|
| Subaru Outback 4WD 2.5 DOHC EMPI Axle Assembly
Front
EMP-K4000-269828 |
|
| Subaru Outback 4WD 2.5 DOHC First Equipment Quality Axle Assembly
Front
FEQ-K4000-241411 |
|
| Subaru XT 1.8 2WD FEQ Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ M/T Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
FEQ-K4000-46025 |
|
| Subaru XT 1.8 2WD EMPI Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front for models w/ M/T Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
EMP-K4000-46025 |
|
| Subaru XT 1.8 4WD EMPI Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY.
EMP-K4000-46025 |
|
| Subaru XT 1.8 4WD ACEI Axle Assembly
23 spline Inboard Joint Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY.
ACE-K4000-106337 |
|
| Subaru XT 1.8 4WD FEQ Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER''S WARRANTY. Front Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY.
FEQ-K4000-46025 |
