| Porsche 911 GKN Drivetech Axle Assembly
(31mm C.V. Joints) Rear Sportomatic (31mm C.V. Joints)
LOB-K4000-22625 |
|
| Porsche 911 GKN Drivetech Axle Assembly
(31mm C.V. Joints) Rear (31mm C.V. Joints)
LOB-K4000-22625 |
|
| Porsche 911 Carrera GKN Drivetech Axle Assembly
(110mm Inner Joint) Outer joint is not serviceable. (110mm Inner Joint) Outer joint is not serviceable.
LOB-K4000-24114 |
|
| Porsche 911 Carrera GKN Drivetech Axle Assembly
**6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly** Rear *New Design Axle Flange* **6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly**
LOB-K4000-22904 |
|
| Porsche 911 Carrera GKN Drivetech Axle Assembly
(110mm Inner Joint) Outer joint is not serviceable. (110mm Inner Joint) Outer joint is not serviceable.
LOB-K4000-324439 |
|
| Porsche 911 SC GKN Drivetech Axle Assembly
**6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly** Rear *New Design Axle Flange* **6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly**
LOB-K4000-22904 |
|
| Porsche 911 SC GKN Automotive Axle Assembly
**6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly** Rear *New Design Axle Flange* **6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly**
LOB-K4000-22904 |
|
| Porsche 911 SC GKN Automotive Axle Assembly
(31mm C.V. Joints) Rear Sportomatic (31mm C.V. Joints)
LOB-K4000-22625 |
|
| Porsche 911 Turbo GKN Automotive Axle Assembly
Rear Also Turbo Look
LOB-K4000-25674 |
|
| Porsche 911/993 Carrera GKN Drivetech Axle Assembly
Rear
LOB-K4000-324448 |
|
| Porsche 911 996 Carrera GKN Drivetech Axle Assembly
Rear
LOB-K4000-127889 |
|
| Porsche 912E GKN Drivetech Axle Assembly
**6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly** Rear *New Design Axle Flange* **6)986 332 190 00 8X45mm CV Bolts Required per Axle** (100mm Inner Joint) GKN/Lobro has changed the design of the axle flange to be 5mm thinner. (Standard CV Bolts are 5mm too long). **At This time the Bolts are NOT included with the axle assembly**
LOB-K4000-22904 |
|
| Porsche 924 GKN Drivetech Axle Assembly
Rear Left & Right
LOB-K4000-20729 |
|
| Porsche 924S GKN Drivetech Axle Assembly
Rear
LOB-K4000-23502 |
|
| Porsche 944 / 2 GKN Drivetech Axle Assembly
Rear
LOB-K4000-23502 |
|
| Porsche 944 /1 GKN Drivetech Axle Assembly
Rear Left & Right
LOB-K4000-20729 |
|
| Porsche 944 Turbo GKN Drivetech Axle Assembly
Rear
LOB-K4000-23502 |
|
| Porsche 944S GKN Drivetech Axle Assembly
Rear
LOB-K4000-23502 |
|
| Porsche 944 S2 GKN Drivetech Axle Assembly
Rear
LOB-K4000-324442 |
|
| Porsche 944 S2 GKN Automotive Axle Assembly
Rear
LOB-K4000-29633 |
