| Nissan 200SX 1.6 base/S Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan 200SX 1.6 SE Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan 200SX 2.0 Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan 200SX 2.0 4-Cyl. Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan 200SX SER Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. 4 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
ATS-C1000-58333 |
|
| Nissan 200SX SER Bosch Fuel Injector
4 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-51452 |
|
| Nissan 200SX SER Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. 4 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
DEL-C1000-58333 |
|
| Nissan 200SX 2.2 Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan 240SX 2.4 DOHC Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan 240SX 2.4 DOHC Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan 240SX 2.4 SOHC Fuel Injection Corp. Fuel Injector
for injector w/ orange mark (4 per engine)
FIC-C1000-136955 |
|
| Nissan 240SX 2.4 SOHC Bosch Fuel Injector
use for cyl. #2 or #3 (injector w/ blue mark)
BOS-C1000-38822 |
|
| Nissan 240SX 2.4 SOHC Bosch Fuel Injector
for injector w/ orange mark (4 per engine)
BOS-C1000-38822 |
|
| Nissan 240SX 2.4 SOHC Bosch Fuel Injector
use for cyl. #1 or #4 (injector w/ black mark)
BOS-C1000-38822 |
|
| Nissan 240SX 2.4 SOHC Japan Fuel Injector
for injector w/ orange mark (4 per engine)
ATS-C1000-39157 |
|
| Nissan 240SX 2.4 SOHC Japan Fuel Injector
use for cyl. #2 or #3 (injector w/ blue mark)
ATS-C1000-39157 |
|
| Nissan 240SX 2.4 SOHC Japan Fuel Injector
use for cyl. #1 or #4 (injector w/ black mark)
ATS-C1000-39157 |
|
| Nissan 240SX 2.4 SOHC Bosch Fuel Injector
for injector w/ orange mark (4 per engine)
BOS-C1000-38830 |
|
| Nissan 280Z 2.8 Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan 280ZX 2.8 Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan 280ZX 2.8 Turbo Fuel Injector
OES-C1000-129615 |
|
| Nissan 300ZX 2+2 Fuel Injection Corp. Fuel Injector
6 per engine
FIC-C1000-81718 |
|
| Nissan 300ZX 2+2 Pacer Fuel Injector
Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks. for injector w/ black mark (6 per engine) Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL of the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks.
PCR-C1000-49653 |
|
| Nissan 300ZX 2+2 Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ blue mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. These catalog listings correspond to the correct replacement injectors per OE Nissan information.
BOS-C1000-38834 |
|
| Nissan 300ZX 2+2 Coupe Bosch Fuel Injector
6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-51452 |
|
| Nissan 300ZX 2+2 Coupe Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. 6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
ATS-C1000-58333 |
|
| Nissan 300ZX 2+2 Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ black mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. These catalog listings correspond to the correct replacement injectors per OE Nissan information.
BOS-C1000-38834 |
|
| Nissan 300ZX 2-seat Pacer Fuel Injector
Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks. for injector w/ blue mark (6 per engine) Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks.
PCR-C1000-49653 |
|
| Nissan 300ZX 2-seat Pacer Fuel Injector
Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks. for injector w/ black mark (6 per engine) Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL of the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks.
PCR-C1000-49653 |
|
| Nissan 300ZX 2-seat Fuel Injection Corp. Fuel Injector
6 per engine
FIC-C1000-81718 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ blue mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-38834 |
|
| Nissan 300ZX 2-seat Coupe Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. for injector w/ red mark (6 per engine) Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
DEL-C1000-58333 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
for injector w/ red mark (6 per engine) Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-51452 |
|
| Nissan 300ZX 2-seat Coupe Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. for injector w/ red mark (6 per engine) Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
ATS-C1000-58333 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-51452 |
|
| Nissan 300ZX 2-seat Coupe Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. 6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
ATS-C1000-58333 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ black mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. These catalog listings correspond to the correct replacement injectors per OE Nissan information.
BOS-C1000-38834 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ blue mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. These catalog listings correspond to the correct replacement injectors per OE Nissan information.
BOS-C1000-38834 |
|
| Nissan 300ZX 2-seat Coupe Bosch Fuel Injector
W/ Black Markings Injectors "Leaking" or "Stuck in the Open Position" is often NOT Valid for warranty returns. Due to the fuel rail design, the installation of the injection valves is very sensitive. Accordingly, a specific procedure must be followed when installing a new Bosch injection valve. Failure to follow these instructions could result in fuel leakeage and damage to the engine. for injector w/ black mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-38834 |
|
| Nissan 300ZX Twin Turbo Bosch Fuel Injector
for injector w/ black mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-39009 |
|
| Nissan 300ZX Twin Turbo Bosch Fuel Injector
for injector w/ blue mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. This catalog listing corresponds to the correct replacement injectors per OE Nissan information.
BOS-C1000-39009 |
|
| Nissan 300ZX Twin Turbo Bosch Fuel Injector
for injector w/ black mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. The Bosch F/I catalog may contain errors regarding the correct injectors for 90-92 300ZX models. This catalog listing corresponds to the correct replacement injectors per OE Nissan information.
BOS-C1000-39009 |
|
| Nissan 300ZX Twin Turbo Bosch Fuel Injector
for injector w/ blue mark Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-39009 |
|
| Nissan 350Z Coupe base Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Coupe base Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan 350Z Coupe Enthusiast Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan 350Z Coupe Enthusiast Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Coupe Perfrmnce Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan 350Z Coupe Perfrmnce Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Coupe Touring Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Coupe Touring Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan 350Z Coupe Track Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Coupe Track Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan 350Z Roadstr Touring Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan 350Z Roadstr Touring Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan Altima 2.4 GLE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 GLE Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 GXE Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 GXE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 GXE Bosch Fuel Injector
for models w/ M/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 GXE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. for models w/ M/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 GXE Bosch Fuel Injector
for Calif. model w/ A/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 GXE Bosch Fuel Injector
for non-Calif. model w/ A/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 GXE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. for non-Calif. model w/ A/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 SE Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 SE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 SE Bosch Fuel Injector
for non-Calif. model w/ A/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 SE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. for non-Calif. model w/ A/T Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 XE Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 XE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.4 XE/GXE Bosch Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
BOS-C1000-38832 |
|
| Nissan Altima 2.4 XE/GXE Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. Bosch injector 62 017 is correct for this application, even though its appearance may differ slightly from the injector originally installed in the vehicle. Bosch 62 017 is the latest injector design for this application and is the same injector as offered by the Nissan dealer.
ATS-C1000-58289 |
|
| Nissan Altima 2.5 (base) Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Altima 2.5 S 4-cyl. Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Altima 3.5 SE V6 Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Altima 3.5 SE V6 Japan Fuel Injector
HIT-C1000-302468 |
|
| Nissan Axxess 2.4 2WD Japan Fuel Injector
for injector w/ blue mark (4 per engine)
ATS-C1000-39157 |
|
| Nissan Axxess 2.4 2WD Bosch Fuel Injector
for injector w/ blue mark (4 per engine)
BOS-C1000-38830 |
|
| Nissan Axxess 2.4 2WD Fuel Injection Corp. Fuel Injector
for injector w/ blue mark (4 per engine)
FIC-C1000-136955 |
|
| Nissan Axxess 2.4 2WD Bosch Fuel Injector
for injector w/ blue mark (4 per engine)
BOS-C1000-38822 |
|
| Nissan Frontier 2WD 4-cyl. Japan Fuel Injector
HIT-C1000-251324 |
|
| Nissan Frontier 2WD V6 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Frontier 2WD V6 Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Frontier 2WD V6 Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Frontier 4WD 4-cyl. Japan Fuel Injector
HIT-C1000-251324 |
|
| Nissan Frontier 4WD V6 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Frontier 4WD V6 Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Frontier 4WD V6 Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Frontier 4WD V6 Fuel Injector
Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two. for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
OES-C1000-139876 |
|
| Nissan Frontier 4WD V6 Japan Fuel Injector
for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Frontier 4WD V6 Fuel Injector
for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
OES-C1000-112604 |
|
| Nissan Frontier 4WD V6 Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Frontier 4WD V6 Fuel Injector
for injector w/ blue mark (6 per engine)
OES-C1000-104467 |
|
| Nissan Hardbody 2WD Pup 2.4 Japan Fuel Injector
4 per engine
HIT-C1000-251324 |
|
| Nissan Hardbody 2WD Pup 2.4 Japan Fuel Injector
for non-Calif. model (4 per engine)
HIT-C1000-56163 |
|
| Nissan Hardbody 2WD Pup 2.4 Fuel Injector
for non-Calif. model (4 per engine)
OES-C1000-56163 |
|
| Nissan Hardbody 2WD Pup 2.4 Japan Fuel Injector
4 per engine
HIT-C1000-56163 |
|
| Nissan Hardbody 2WD Pup 2.4 Fuel Injector
4 per engine
OES-C1000-56163 |
|
| Nissan Hardbody 2WD Pup 3.0 Fuel Injector
2 per engine
OES-C1000-35768 |
|
| Nissan Hardbody 2WD Pup 3.0 Bosch Fuel Injector
for injector w/ blue mark (6 per engine)
BOS-C1000-56161 |
|
| Nissan Hardbody 2WD Pup 3.0 Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-56159 |
|
| Nissan Hardbody 2WD Pup 3.0 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-56160 |
|
| Nissan Hardbody 4WD Pup 2.4 Japan Fuel Injector
4 per engine
HIT-C1000-251324 |
|
| Nissan Hardbody 4WD Pup 2.4 Japan Fuel Injector
4 per engine
HIT-C1000-56163 |
|
| Nissan Hardbody 4WD Pup 2.4 Fuel Injector
4 per engine
OES-C1000-56163 |
|
| Nissan Hardbody 4WD Pup 3.0 Fuel Injector
2 per engine
OES-C1000-35768 |
|
| Nissan Hardbody 4WD Pup 3.0 Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-56159 |
|
| Nissan Hardbody 4WD Pup 3.0 Bosch Fuel Injector
for injector w/ blue mark (6 per engine)
BOS-C1000-56161 |
|
| Nissan Hardbody 4WD Pup 3.0 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-56160 |
|
| Nissan Hardbody 4WD Pup 3.0 Bosch Fuel Injector
for injector w/ black mark (6 per engine)
BOS-C1000-81666 |
|
| Nissan Maxima 3.0 4dr Pacer Fuel Injector
Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL of the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks. Jecs - Blue Coupler Beige Connector Nissan and Bosch do not recommend mixing injectors with different color marks on the same engine. If using a Bosch or OE injector with a different color mark, ALL the injectors on the engine should be replaced at the same time. The injector manufactured by Pacer is designed to replace injectors with either black or blue marks.
PCR-C1000-169554 |
|
| Nissan Maxima 3.0 4dr Fuel Injection Corp. Fuel Injector
6 per engine
FIC-C1000-81718 |
|
| Nissan Maxima 3.0 DOHC SE Bosch Fuel Injector
6 per engine
BOS-C1000-39011 |
|
| Nissan Maxima 3.0 DOHC SE Japan Fuel Injector
6 per engine
ATS-C1000-110045 |
|
| Nissan Maxima GLE Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan Maxima GLE Japan Fuel Injector
6 per engine
ATS-C1000-110045 |
|
| Nissan Maxima GLE Bosch Fuel Injector
6 per engine
BOS-C1000-39011 |
|
| Nissan Maxima GLE Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan Maxima 3.0 GXE Japan Fuel Injector
6 per engine
ATS-C1000-110045 |
|
| Nissan Maxima 3.0 GXE Bosch Fuel Injector
6 per engine
BOS-C1000-39011 |
|
| Nissan Maxima 3.0 GXE Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan Maxima 3.0 GXE Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan Maxima 3.0 SE Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan Maxima 3.0 SE Japan Fuel Injector
6 per engine
ATS-C1000-110045 |
|
| Nissan Maxima 3.0 SE Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan Maxima 3.0 SE Bosch Fuel Injector
6 per engine
BOS-C1000-39011 |
|
| Nissan Maxima 3.0 SOHC GXE Bosch Fuel Injector
6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-38818 |
|
| Nissan Maxima 3.0 SOHC GXE Japan Fuel Injector
w/ yellow mark (6 per engine)
ATS-C1000-90750 |
|
| Nissan Maxima 3.0 SOHC GXE Bosch Fuel Injector
w/ yellow mark (6 per engine)
BOS-C1000-51453 |
|
| Nissan Maxima 3.0 SOHC GXE Bosch Fuel Injector
w/ green mark (6 per engine)
BOS-C1000-51454 |
|
| Nissan Maxima 3.0 SOHC GXE Japan Fuel Injector
w/ green mark (6 per engine)
ATS-C1000-90751 |
|
| Nissan Maxima 3.0 SOHC SE Bosch Fuel Injector
6 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-38818 |
|
| Nissan Maxima 3.5 GLE Japan Fuel Injector
HIT-C1000-302468 |
|
| Nissan Maxima 3.5 SE Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Maxima 3.5 SE Japan Fuel Injector
HIT-C1000-302468 |
|
| Nissan Maxima 3.5 SL Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Maxima/810 4dr Gas Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan Maxima/810 5dr Gas Pacer Fuel Injector
See notes in catalog on part # 16603-N7613 regarding this injector.
PCR-C1000-12958 |
|
| Nissan Murano 3.5 AWD Japan Fuel Injector
HIT-C1000-302468 |
|
| Nissan NX1600 Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan NX2000 Bosch Fuel Injector
4 per engine
BOS-C1000-51457 |
|
| Nissan Pathfinder 3.0 4WD Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-56160 |
|
| Nissan Pathfinder 3.0 4WD Bosch Fuel Injector
for injector w/ black mark (6 per engine)
BOS-C1000-81666 |
|
| Nissan Pathfinder 3.0 4WD Bosch Fuel Injector
for injector w/ blue mark (6 per engine)
BOS-C1000-56161 |
|
| Nissan Pathfinder 3.0 4WD Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-56159 |
|
| Nissan Pathfinder 3.0 4WD Fuel Injector
OES-C1000-35768 |
|
| Nissan Pathfinder 3.3 2WD Japan Fuel Injector
for injector w/ blue or white mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 2WD Fuel Injector
for injector w/ blue or white mark (6 per engine)
OES-C1000-139876 |
|
| Nissan Pathfinder 3.3 2WD Japan Fuel Injector
for injector w/ black or yellow mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 2WD Fuel Injector
for injector w/ black or yellow mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Pathfinder 3.3 2WD Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 2WD Japan Fuel Injector
for injector w/ blue or white mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ black or yellow mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ blue or white mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.3 4WD Fuel Injector
for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
OES-C1000-112604 |
|
| Nissan Pathfinder 3.3 4WD Fuel Injector
for injector w/ blue mark (6 per engine)
OES-C1000-139876 |
|
| Nissan Pathfinder 3.3 4WD Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Pathfinder 3.5 2WD Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan Pathfinder 3.5 4WD Bosch Fuel Injector
6 per engine
BOS-C1000-112886 |
|
| Nissan Pathfinder 3.5 4WD Japan Fuel Injector
6 per engine
HIT-C1000-302468 |
|
| Nissan Pathfinder 4.0 2WD Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Pathfinder 4.0 4WD Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Pulsar NX XE 1.6SOHC Bosch Fuel Injector
(1 per engine)
BOS-C1000-38817 |
|
| Nissan Quest 3.0 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-56160 |
|
| Nissan Quest 3.0 Bosch Fuel Injector
for injector w/ blue mark (6 per engine)
BOS-C1000-56161 |
|
| Nissan Quest 3.0 Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-56159 |
|
| Nissan Quest 3.0 Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Quest 3.0 Bosch Fuel Injector
for injector w/ black mark (6 per engine)
BOS-C1000-81666 |
|
| Nissan Quest 3.0 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Quest 3.0 Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Quest 3.3 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Quest 3.3 Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Quest 3.3 Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Quest 3.3 Fuel Injector
Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two. for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
OES-C1000-139876 |
|
| Nissan Quest 3.3 Japan Fuel Injector
for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
HIT-C1000-230716 |
|
| Nissan Quest 3.3 Fuel Injector
Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two. for injector w/ black mark (6 per engine) Hitachi is currently only offering the blue mark version of this injector. If the vehicle has black mark injectors, the blue mark version will perform correctly if all of the injectors on the cylinder head are changed from black mark ones to blue mark ones. We still have some OE Service injectors with black marks for those who wish to replace just one or two.
OES-C1000-140819 |
|
| Nissan Quest 3.3 Japan Fuel Injector
for injector w/ blue mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Quest 3.3 Fuel Injector
for injector w/ blue mark (6 per engine)
OES-C1000-139876 |
|
| Nissan Quest 3.5 SE Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Sentra 1.6 2dr/4dr Bosch Fuel Injector
for throttle body F/I (1 per engine)
BOS-C1000-38817 |
|
| Nissan Sentra 1.6 3dr Coupe Bosch Fuel Injector
(1 per engine)
BOS-C1000-38817 |
|
| Nissan Sentra 1.6 3dr HBack Bosch Fuel Injector
for throttle body F/I (1 per engine)
BOS-C1000-38817 |
|
| Nissan Sentra 1.6 base/E Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.6 GXE/GLE Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.6 Std/E 2dr Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.6 Std/E 4dr Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.6 XE Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra XE GXE Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.6 XE/SE 2dr Bosch Fuel Injector
BOS-C1000-38828 |
|
| Nissan Sentra 1.8 base/S Japan Fuel Injector
Inc. Seals
HIT-C1000-302469 |
|
| Nissan Sentra 1.8 GXE Fuel Injection Corp. Fuel Injector
Exc. Clean Air Vehicle, Inc. Seals
FIC-C1000-251328 |
|
| Nissan Sentra 1.8 GXE Japan Fuel Injector
Inc. Seals
HIT-C1000-302469 |
|
| Nissan Sentra 1.8 GXE Fuel Injection Corp. Fuel Injector
Inc. Seals
FIC-C1000-251328 |
|
| Nissan Sentra 1.8 XE Japan Fuel Injector
Inc. Seals
HIT-C1000-302469 |
|
| Nissan Sentra 1.8 XE Fuel Injection Corp. Fuel Injector
Inc. Seals
FIC-C1000-251328 |
|
| Nissan Sentra 2.0 SE Japan Fuel Injector
4 per engine
HIT-C1000-302468 |
|
| Nissan Sentra 2.0 SE Bosch Fuel Injector
4 per engine
BOS-C1000-112886 |
|
| Nissan Sentra 2.0 SE-R 2dr Bosch Fuel Injector
4 per engine
BOS-C1000-51457 |
|
| Nissan Sentra 2.0 SE-R 2dr Bosch Fuel Injector
4 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
BOS-C1000-51452 |
|
| Nissan Sentra 2.0 SE-R 2dr Japan Fuel Injector
Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. 4 per engine Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
ATS-C1000-58333 |
|
| Nissan Sentra 2.5 LE/S Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Sentra 2.5 SE-R Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Sentra SER Spec V Japan Fuel Injector
Inc. Seals
HIT-C1000-302468 |
|
| Nissan Stanza 2.4 XE Bosch Fuel Injector
for models w/ A/T (injector w/ black mark, 4 per engine)
BOS-C1000-38822 |
|
| Nissan Stanza 2.4 XE Japan Fuel Injector
for models w/ A/T (injector w/ black mark, 4 per engine)
ATS-C1000-39157 |
|
| Nissan Stanza 2.4 XE Japan Fuel Injector
for models w/ A/T (injector w/ blue mark, 4 per engine)
ATS-C1000-39157 |
|
| Nissan Stanza 2.4 XE Bosch Fuel Injector
for models w/ A/T (injector w/ blue mark, 4 per engine)
BOS-C1000-38822 |
|
| Nissan Xterra 2WD 4-cyl. Japan Fuel Injector
HIT-C1000-251324 |
|
| Nissan Xterra 2WD V6 Fuel Injector
for injector w/ black mark (6 per engine)
OES-C1000-140819 |
|
| Nissan Xterra 2WD V6 Japan Fuel Injector
for injector w/ black mark (6 per engine)
HIT-C1000-230716 |
|
| Nissan Xterra 4WD V6 Japan Fuel Injector
for injector w/ blue mark (6 per engine) Hitachi is currently only offering the black mark version of this injector. If the vehicle has blue mark injectors, the black mark version will perform correctly if all of the injectors on the cylinder head are changed from blue mark ones to black mark ones. We may still have a few of the OE Service injectors with blue marks for those who wish to replace just one or two.
HIT-C1000-230716 |
