|
|
|
OEM Replacement Parts > Cam Follower > Mitsubishi Cam Follower
Mitsubishi Cam Follower Catalog
|
| Mitsubishi 3000GT 3.0 DOHC 2WD Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (24 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi 3000GT 3.0 SOHC 2WD GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi 3000GT VR4 Turbo Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (24 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Diamante3.0SOHCWagon GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Eclipse 2.0 DOHC Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Eclipse 2.0 DOHC Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
OES-A4010-62129 |
|
| Mitsubishi Eclipse 2.0 DOHC Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
OES-A4010-127051 |
|
| Mitsubishi Eclipse GST Turbo DSM Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Eclipse GSX Turbo DSM Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Eclipse 2.4 SOHC GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Eclipse GT GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Expo 2.4 7-Passenger GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Galant 2.0 DOHC 2WD Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. 16 per engine When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Galant 2.4 4-Cyl. GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Galant 2.4 SOHC GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Galant 3.0 V6 GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Lancer 2.0 GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Mirage 1.5 GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Mirage 1.6 Turbo 3Dr Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
-A4010-64751 |
|
| Mitsubishi Mirage 1.8 GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Mont. Sport 4WD 3.0 GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Pickup 2.4 4-Cyl 2WD GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Hyraulic Valve Adjuster 8 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
|
| Mitsubishi Pickup 3.0 V6 4WD GMB Cam Follower
When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up.
GMB-A4010-104019 |
Back to all OEM Replacement Parts.
|
|
|
|
|
