|
|
|
OEM Replacement Parts > Cam Follower > Kia Cam Follower
| Kia Rio 1.5LDOHC16V 4-Dr Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. Hydraulic Valve Adjuster Req. 16 When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
OES-A4010-107601 |
|
| Kia Rio Cinco1.5LDOHC16V Cam Follower
When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. Hydraulic Valve Adjuster Req. 16 When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
OES-A4010-107601 |
Back to all OEM Replacement Parts.
|
|
|
|
|
