
| BMW 318i Sedan Behr Heater Core
Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other. Aluminum inlet Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other.
BEH-R3000-31067 |
|

| BMW 318i Sedan Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
OES-R3000-31066 |
|

| BMW 318i Sedan ACM Heater Core
With o-rings and foam seal.
ACM-R3000-41537 |
|

| BMW 318i Sedan Behr Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
BEH-R3000-31066 |
|
| BMW 318ti Behr Heater Core
BEH-R3000-275078 |
|

| BMW 323i Sedan Behr Heater Core
BEH-R3000-118946 |
|

| BMW 325 Behr Heater Core
Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other. Aluminum inlet Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other.
BEH-R3000-31067 |
|

| BMW 325e Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
OES-R3000-31066 |
|

| BMW 325e Behr Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
BEH-R3000-31066 |
|

| BMW 325e Behr Heater Core
Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other. Aluminum inlet Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other.
BEH-R3000-31067 |
|

| BMW 325i Sedan Behr Heater Core
Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other. Aluminum inlet Aluminum inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and the valve are located on the end of the core in a "stacked" position one above the other.
BEH-R3000-31067 |
|

| BMW 325i Sedan Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
OES-R3000-31066 |
|

| BMW 325i Sedan Behr Heater Core
Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position. Plastic inlet Plastic inlet refers to heater valve inlet tube. This core is most easily identified by the positioning of the inlet tube and the heater valve. The tube and valve are located on the end of the core in a forward and rear position.
BEH-R3000-31066 |
|

| BMW 325i Sedan Behr Heater Core
BEH-R3000-118946 |
|

| BMW 328i Sedan Behr Heater Core
BEH-R3000-118946 |
|

| BMW 525i Behr Heater Core
BEH-R3000-120553 |
|
| BMW 525i Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 525i Behr-Hella Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|
| BMW 525i Nissens Heater Core
NSS-R3000-120553 |
|

| BMW 525i Touring Nissens Heater Core
NSS-R3000-120553 |
|
| BMW 528e Nissens Heater Core
Behr
NSS-R3000-113880 |
|

| BMW 528e Heater Core
Behr
OES-R3000-113880 |
|

| BMW 528e Heater Core
Sofica
OES-R3000-21506 |
|
| BMW 528i ACM Heater Core
w/ Climate Control
ACM-R3000-275053 |
|

| BMW 530i Touring Nissens Heater Core
NSS-R3000-120553 |
|

| BMW 535i Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 535i Behr Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|
| BMW 535i Nissens Heater Core
Behr
NSS-R3000-113880 |
|

| BMW 535i Heater Core
Behr
OES-R3000-113880 |
|

| BMW 535i Heater Core
Sofica
OES-R3000-21506 |
|

| BMW 540i Nissens Heater Core
NSS-R3000-120553 |
|

| BMW 733i Heater Core
OES-R3000-21505 |
|

| BMW 735i Behr Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|
| BMW 735i Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 735i Heater Core
OES-R3000-21505 |
|
| BMW 735iL Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 735iL Behr Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|

| BMW 740i Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 740i Behr Heater Core
Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer. Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer.
BEH-R3000-118239 |
|

| BMW 740iL Behr Heater Core
Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer. Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer.
BEH-R3000-118239 |
|
| BMW 740iL Heater Core
Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer. Models prior to production of 9/96 will require (1) 64 11 8 373 177 heater pipe as available from local dealer.
OES-R3000-118239 |
|

| BMW 740iL Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 740iL Behr Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|

| BMW 740iL Behr-Hella Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|

| BMW 750iL Behr Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
BEH-R3000-169038 |
|
| BMW 750iL Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |
|

| BMW 850i Nissens Heater Core
Includes o-rings, foam installation, and instructions. Includes o-rings, foam installation, and instructions.
NSS-R3000-169038 |