| Audi 200 QT 20V Elring Camshaft Seal
47x32x10mm
ELR-A8080-54506 |
|
| Audi 200 QT 20V Corteco Camshaft Seal
47x32x10mm
CFW-A8080-54506 |
|
| Audi 80 5 CYL Elring Camshaft Seal
47x32x10mm
ELR-A8080-54506 |
|
| Audi 80 5 CYL Corteco/Freudenberg Camshaft Seal
47x32x10mm
CFW-A8080-54506 |
|
| Audi 80 5 CYL Aftermarket Camshaft Seal
47x32x10mm
AFT-A8080-54506 |
|
| Audi 90 5 CYL Elring Camshaft Seal
47x32x10mm
ELR-A8080-54506 |
|
| Audi 90 5 CYL Corteco Camshaft Seal
47x32x10mm
CFW-A8080-54506 |
|
| Audi A4 Cabrio/Quattro Victor Reinz Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 (2 Req) *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
REI-A8080-111396 |
|
| Audi A4 Cabrio/Quattro FEQ Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 (2 Req) *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
FEQ-A8080-111396 |
|
| Audi A4 Quattro V6 30V Elring Camshaft Seal
47x32x10mm Camshaft (4 Req)
ELR-A8080-54506 |
|
| Audi A4 Quattro V6 30V Aftermarket Camshaft Seal
47x32x10mm Camshaft (4 Req)
AFT-A8080-54506 |
|
| Audi A4 Quattro V6 30V Reinz Camshaft Seal
47x32x10mm Camshaft (4 Req)
REI-A8080-64066 |
|
| Audi A4 Turbo 4 CYL 20V Elring Camshaft Seal
47x32x10mm Reqs. 2
ELR-A8080-54506 |
|
| Audi A4 Turbo 4 CYL 20V Victor Reinz Camshaft Seal
47x32x10mm Reqs. 2
REI-A8080-64066 |
|
| Audi A4 Turbo 4 CYL 20V Corteco Camshaft Seal
47x32x10mm Reqs. 2
CFW-A8080-54506 |
|
| Audi A4 Turbo 4 CYL 20V FEQ Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 2 Req *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
FEQ-A8080-111396 |
|
| Audi A4 Turbo 4 CYL 20V Victor Reinz Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 2 Req *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
REI-A8080-111396 |
|
| Audi A4 V6 2.8L-30V Elring Camshaft Seal
47x32x10mm Camshaft (4 Req)
ELR-A8080-54506 |
|
| Audi A4 V6 2.8L-30V Aftermarket Camshaft Seal
47x32x10mm Camshaft (4 Req)
AFT-A8080-54506 |
|
| Audi A4 V6 2.8L-30V Victor Reinz Camshaft Seal
47x32x10mm Camshaft (4 Req)
REI-A8080-64066 |
|
| Audi A4 V6 2.8L-30V Corteco Camshaft Seal
47x32x10mm Camshaft (4 Req)
CFW-A8080-54506 |
|
| Audi A6 Allroad Quattro Reinz Camshaft Seal
47x10 Reqs. 1 Shaft Rotation; Left
REI-A8080-131913 |
|
| Audi A6 Allroad Quattro Elring Camshaft Seal
47x32x10mm Reqs. 4
ELR-A8080-54506 |
|
| Audi A6 Allroad Quattro Aftermarket Camshaft Seal
47x32x10mm Reqs. 4
AFT-A8080-54506 |
|
| Audi A6 Allroad Quattro Corteco Camshaft Seal
47x32x10mm Reqs. 4
CFW-A8080-54506 |
|
| Audi A6 Quattro Turbo V6 Corteco Camshaft Seal
47x32x10mm Reqs. 4
CFW-A8080-54506 |
|
| Audi A6 Quattro Turbo V6 Elring Camshaft Seal
47x32x10mm Reqs. 4
ELR-A8080-54506 |
|
| Audi A6 Quattro Turbo V6 Aftermarket Camshaft Seal
47x32x10mm Reqs. 4
AFT-A8080-54506 |
|
| Audi A6 Quattro V6 12V Elring Camshaft Seal
47x32x10mm Camshaft (3 Req)
ELR-A8080-54506 |
|
| Audi A6 Quattro V6 12V Corteco/Freudenberg Camshaft Seal
47x32x10mm Camshaft (3 Req)
CFW-A8080-54506 |
|
| Audi A6 Quattro V6 12V Aftermarket Camshaft Seal
47x32x10mm Camshaft (3 Req)
AFT-A8080-54506 |
|
| Audi A6 Quattro V6 12V Reinz Camshaft Seal
47x32x10mm Camshaft (3 Req)
REI-A8080-64066 |
|
| Audi A6 Quattro V6 3.0L Camshaft Seal
55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap* Camshaft (4 Req) 55x41x7mm 55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap*
OES-A8080-134013 |
|
| Audi A6 Quattro V6 3.0L Camshaft Seal
30x2mm Cam Gear O-Ring, Located Behind Cam Bolt Seal Cap O-Ring Cam Gear O-Ring, Located Behind Cam Bolt Seal Cap 30x2mm 30x2mm Cam Gear O-Ring, Located Behind Cam Bolt Seal Cap
OES-A8080-274748 |
|
| Audi A6 Quattro V6 3.0L Victor Reinz Camshaft Seal
55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap* Camshaft (4 Req)
REI-A8080-134013 |
|
| Audi A6 Quattro V6 3.0L Camshaft Seal
55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap* Camshaft (4 Req)
OES-A8080-134013 |
|
| Audi A6 Quattro V6 3.0L Victor Reinz Camshaft Seal
55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap* Camshaft (4 Req) 55x41x7mm 55x41x7mm *Also see # N 904 694 01 Seal O-Ring, Located Behind Cam Bolt Sealing Cap*
REI-A8080-134013 |
|
| Audi A6 Quattro V8 4.2L Elring Camshaft Seal
47x32x10mm Reqs. 4
ELR-A8080-54506 |
|
| Audi A6 Quattro V8 4.2L Corteco/Freudenberg Camshaft Seal
47x32x10mm Reqs. 4
CFW-A8080-54506 |
|
| Audi A6 Quattro V8 4.2L Aftermarket Camshaft Seal
47x32x10mm Reqs. 4
AFT-A8080-54506 |
|
| Audi A8 Quattro V8 4.2L Elring Camshaft Seal
47x32x10mm
ELR-A8080-54506 |
|
| Audi A8 Quattro V8 4.2L Aftermarket Camshaft Seal
47x32x10mm
AFT-A8080-54506 |
|
| Audi A8 Quattro V8 4.2L Reinz Camshaft Seal
47x32x10mm
REI-A8080-64066 |
|
| Audi A8 Quattro V8 4.2L Corteco/Freudenberg Camshaft Seal
47x32x10mm
CFW-A8080-54506 |
|
| Audi S4 Q Turbo Elring Camshaft Seal
47x32x10mm Camshaft (2 Req)
ELR-A8080-54506 |
|
| Audi S4 Q Turbo Aftermarket Camshaft Seal
47x32x10mm Camshaft (2 Req)
AFT-A8080-54506 |
|
| Audi S4 Q Turbo Victor Reinz Camshaft Seal
47x32x10mm Camshaft (2 Req)
REI-A8080-64066 |
|
| Audi S4 Q Turbo Corteco Camshaft Seal
47x32x10mm Camshaft (2 Req)
CFW-A8080-54506 |
|
| Audi S4 Q Twin Turbo V6 Elring Camshaft Seal
47x32x10mm Reqs. 4
ELR-A8080-54506 |
|
| Audi S4 Q Twin Turbo V6 Aftermarket Camshaft Seal
47x32x10mm Reqs. 4
AFT-A8080-54506 |
|
| Audi S4 Q Twin Turbo V6 Kaco Camshaft Seal
47x32x10mm Reqs. 4
KAC-A8080-54506 |
|
| Audi TT Quattro Victor Reinz Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 2 Req *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
REI-A8080-111396 |
|
| Audi TT Quattro FEQ Camshaft Seal
*Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed** 47x10 2 Req *Update PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip* ** Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed**
FEQ-A8080-111396 |
|
| Audi V8 Q Elring Camshaft Seal
47x32x10mm
ELR-A8080-54506 |
|
| Audi V8 Q Aftermarket Camshaft Seal
47x32x10mm
AFT-A8080-54506 |
