| Audi 100 V6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi 200 QT 20V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi 80 5 CYL INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi 90 Q INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi 90 Q 20V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi 90 V6 INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi A4 V6 3.0L INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Intake Reqs. 18 *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61773 |
|
| Audi A4 V6 3.0L INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust Reqs. 12 *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61772 |
|
| Audi A4 V6 3.0L German Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust Reqs. 12 *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
GER-A4010-61772 |
|
| Audi A6 V6 2.8L-12V INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Hydraulic *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-133887 |
|
| Audi Coupe Q 20V INA Cam Follower
Hydraulic
INA-A4010-29856 |
|
| Audi S4 Q Twin Turbo V6 INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Intake Reqs. 18 *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61773 |
|
| Audi S4 Q Twin Turbo V6 INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust Reqs. 12 *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61772 |
|
| Audi V8 Q INA Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust 32 Req Intake and Exhaust *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
INA-A4010-61772 |
|
| Audi V8 Q German Cam Follower
*New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st Exhaust 32 Req Intake and Exhaust *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st
GER-A4010-61772 |
