Yonaka OBD2a to OBD1 Harness
There are many limitations with the OBD2 ECUs found in the Honda and Acura cars when trying to modify your car. There are even more
restrictions with the OBD2a ECU. These ECUs are designed for lower emissions and do so at the expense of performance. When you want
to modify your car, and open up the maximum available power, we recommend using an older OBD1 ECU. In order to do so, you will either need to
completely hack up your car's wiring system and swap the wires to the OBD1 format, or you can save time, money and energy, and purchase
this high quality Yonaka OBD1 harness. Installation is simple! Remove your old ECU, plug the new harness to your old harness, and plug in the new OBD1
ECU to the other end of the new harness. Done!
This harness works great on Acura Integras, Honda Civic's, Honda Prelude's, and Honda Accords where the old ECU was an OBD2a, and the new one is a OBD1.
We are authorized Yonaka Dealers!
|
Yonaka OBD2a to OBD1 Harness
| Honda/Acura OBD2A to OBD1 Harness Adapter |
YMCH2A1 |
$79.99 |
|
We are authorized Yonaka Dealers!
|
