|
|
|
Skunk2 Lowering Springs
Skunk2 Lowering Springs are designed to dramatically improve handling performance and driver feel by significantly increasing corner grip and reducing body roll. Skunk2 springs are CNC-wound using the highest quality SAE9254V spring steel, shot peen stress relieved, and corrosion protected using phosphate and powder coatings. Each spring is designed to optimize the balance between performance and comfort. The result is a spring that offers racecar like handling, yet maintains smooth and comfortable ride characteristics. Skunk2 Lowering Springs can be used with factory or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels. Average drop is approximately 1.5” - 1.75”. When applicable, we recommend using Skunk2 Lowering Springs with Skunk2 Sport Shocks and other fine Skunk2 suspension components.
 CNC-Wound
SAE9254V Spring Steel
Shot Peen Stress Relieved
Corrosion Resistant Powder Coating
1.5” - 1.75” Average Drop
Excellent Ride Characteristics
Significantly Increases Corner Grip
Use With Stock or Aftermarket Wheels
|
Skunk2 Lowering Springs
| Acura Integra 90-93 All (Drop 2.5 - 2.25") |
519-05-1640 |
$139.52 |
|
|
| Acura Integra 94-01 All (Drop 2.5 - 2.25") |
519-05-1560 |
$139.52 |
|
|
| Acura RSX 02-04 All (Drop 2.25 - 2.00") |
519-05-1670 |
$153.60 |
|
|
| Acura RSX 05-06 All (Drop 2.25 - 2.00") |
519-05-1672 |
$153.60 |
|
|
| Honda Accord 90-97 All (Drop 2.00 - 1.80") |
519-05-1630 |
$160.00 |
|
|
| Honda Civic / Del Sol 92-05 All (Drop 2.50 - 2.25") |
519-05-1480 |
$139.52 |
|
|
| Honda Civic / Del Sol 96-00 All (Drop 2.50 - 2.25") |
519-05-1550 |
$139.52 |
|
|
| Honda Civic 01-04 All Non Si (Drop 2.25 - 2.00") |
519-05-1570 |
$153.60 |
|
|
| Honda Civic 02-04 Si (Drop 2.25 - 2.00") |
519-05-1575 |
$153.60 |
|
|
| Honda Civic 02-04 Si (Drop 2.25 - 2.00") |
519-05-1575 |
$153.60 |
|
|
| Honda Prelude 93-01 (Drop 2.25 - 2.00") |
519-05-1660 |
$160.00 |
|
Skunk2 Racing lowering springs give your car superior handling performance and an aggressive stance with an extra smooth ride. The same engineering and quality that goes into our racing springs also goes into all of our lowering springs. Each spring is CNC-wound using SAE 9254 spring steel, shot peen stress relieved, and corrosion protected using phosphate and powder coatings. The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics.
Manufacture Website: Skunk2 Lowering Springs.
|
|
|
|
