Search
Aftermarket
Replacement
Categories





   
Skunk2 Intake Manifold

Skunk2 Intake Manifold

Skunk2 Intake Manifold

One of the most restrictive parts of the Honda engine is the intake manifold. Skunk2 has released one of the best intake manifolds on the market, which can increase horsepower as much as 8% on a completely stock Honda engine. If your Honda is turbo or modified, the gains will be even higher. Skunk2 intake manifolds are designed for power where you need it, mid to top end, from 33000 rpm to 8800 rpm, one of the largest power bands in the industry! statRacing carries the all new Pro Series Skunk2 Intake Manifold, which has as much as 22% gains over the old Skunk2 Intake Manifold. Unlike other intake manifolds that are designed to just be knock off's, copies, or just plain unengineering intake manifolds, the Skunk2 intake manifold is original, designed and tested by the Skunk2 racing team, and has technology unheard of with the other intake manifolds. This means the Skunk2 Intake Manifold Plenum is larger, has smoother runners, and has a special balance of air between the cylinders. Skunk2 Intake Manifolds allow you to also run a larger throttle body, and each Skunk2 intake manifold is vacuum tested to ensure that when you put it on, you won't need to take it off 5 minute later because it leaks. Unlike other intake manifolds, the Skunk2 Intake Manifold reuses all stock sensors, and delivers the most power hands down. Ideal for all motor or forced induction, stock or modified.



Skunk2 Intake Manifold

Acura Integra 92-93 GSR 1.7L (CARB LEGAL) 307-05-0290 $242.59

Acura Integra 94-01 B18C1 (CARB Legal) 307-05-0270 $242.59

Acura Integra 90-01 LS/RS B18A-B (CARB Legal) 307-05-0280 $242.59

Acura Integra 97-01 Type R B18C5 (CARB Legal) 307-05-0290 $242.59

Honda Civic 99-00 B16A2 Si (CARB Legal) 307-05-0290 $242.59

Honda 88-00 Civic/CRX/Del Sol (D15B7, D16A-Z) Race Only 307-05-0260 $242.59

Honda CRV B20B-Z DOHC (CARB Legal) 307-05-0280 $242.59

Honda Prelude 94-01 (H22A EGR Kit Included) Race Only 307-05-0300 $318.14



Skunk2 Intake Manifold Additional Information



Skunk2 Has Been Leading the Sport Compact Car Industry with Cast Aluminum Manifolds Since 2000
  • Increased Plenum and Runner Size
  • Oversized Throttle Body Opening
  • Made From High-Grade 356 Aluminum
  • OEM Quality Shell Molded Casting
  • Nitrous Mounting Bungs
  • Skunk2 Acid-Etched Nameplate
  • Broadest Usable Powerband
  • Vacuum Tested To Ensure Quality
  • Utilizes Stock Sensors 64mm Throttle Body Opening That Can Be Port Matched To 75mm
  • Increased Plenum Volume
  • 8” Tapered Runners For Maximum Torque and Power Increase
  • CARB EO Approved

    Manufacture Website: Skunk2 Pro Series Intake Manifold.

    Do you want to review the Skunk2 Intake Manifold? Do you have any questions about this manifold for your Honda or Acura? Honda and Acura Forum
  •    





    Aftermarket and Replacement Parts Warehouse
    Home | Contact Us | Wholesale | Privacy Policy | Terms of Use | LinksCopyright (C) 2007-2011